Manufacturers:

Global Print Finishing Equipment Ltd.
7 Appelton Court
Wakefield
West Yorkshire WF2 7AR
England

Tel: +44 1924 332425

  

Homepage » Stock list »

Manufacturer stock list

Autobond

  • 2013 Autobond MINI 76SD-TPEM, 72 x 102 cm, automatic thermal laminator, 72 x 102cm, bottom separation, continuous suction feed with Heidelberg/Stahl suction drum, Autobond bump sheeter with digital sheet counter, anti-curl bar, perfector either single or 2 sheets in 1 pass, edge seal or flush cut, (8661)

    • Billhöfer

  • 2000 Billhöfer ATS102, 106 x 143 cm, Billhofer/Ecosystem fully automatic thermal dry laminator (8839)
  • 1987 Billhöfer FK76, 76 x 114 cm, min sheet size 21 x 21cm, Mabeg automatic pile suction feed, BAT 76 sheet separator, max mechanical speed up to 50m/min, for use with water based & thermal, adhesives, fully automatic stacker, (8851)

    • Bobst

  • 1999 Bobst 142-E, 100 x 141 cm, hot stamping & embossing, (rebuilt by Mike King, USA 2011), max sheet size 1000 x 1414mm, uses Eagle Ecofoil system with 4 dancers collecting the used foil, die cutting capability, (8891)

    • Cellcoat

  • 2020 Cellcoat DIAMOND, 76 x 105 cm, min sheet size 210 x 297mm, flying knife with blade overlap for cutting of polyester & metallised film, speed up to 75m/min, sheet decurler, pallet stacker (8825)

    • Crosland

  • Crosland Cauhe, 112 x 162 cm, hand fed die cutter, material solid board up to 2,500 microns, E & B flute corrugated (8880)

    • Ecoscreen

  • 2016 Ecoscreen Compact 76, 76 x 106 cm, min format 25 x 25cm, maximum format 88 x 114cm, automatic sheet feeder, max speed 60m/min, only run 150 hours (8888)

    • EcoSystem

  • 2012 EcoSystem MODULO DRY 102, 102 x 142 cm, automatic Ecosystem feeder, vacuum table conveyor, lamination unit heated by water centralised system, chilling roller after lamination, automatic separator, automatic stacker, max speed 80m/min (8827)
  • 2006 EcoSystem Compact 76, 76 x 106 cm, min format 25 x 25cm, maximum format 88 x 114cm, automatic sheet feeder, max speed 60m/min. (8922)

    • GBC

  • 2006 GBC Centurion, 105 x 140 cm, Samal automatic pile suction feeder, automatic sheet separator, paper thickness 115gsm-1000gsm, fully automatic stacker. (8929)

    • Gietz

  • 2001 Gietz FSA870, 87 x 56 cm, provision for diecutting, min sheet 28 x 21cm, stamping area max 800 x 520mm, pile height at feeder side 1120mm, delivery side 850mm, Mabeg feeder, 2 longitudinal foil feeds, 3 foil drives, high pile feeder. (8904)

    • Heidelberg

  • 2019 Heidelberg 106CSB, 76 x 106 cm, Promatrix, with blanking system, stocks up to 2000gsm/m2, impression tonnage 260, speed 7,500sph, counter impression 35 million, working hours 7605 (8944)
  • 2018 Heidelberg Easymatrix, 76 x 106 cm, min sheet size 45 x 36cm, max feeder pile height 115cm, max delivery pile height 100cm, max cutting force 320T, 9,000 working hours, speed 7,500sph (8938)
  • Heidelberg CYLINDER, 54 x 72 cm, max sheet size 54 x 72cm, min sheet size 11 x 16cm, hot foil with honeycomb plate, 10 heating zones, embossing, sheet range 80gr, speed 2500sph (8859)

    • Iberica

  • 2004 Iberica TR-105F, 75 x 105 cm, speed 9000sph, Centreline-system (micrometric adjustment of the cutting plate), stripping, PLC computer, device for small size 35 x 40cm, non stop delivery (8905)

    • Lamtex

  • 2000 Lamtex Ti76, 102 x 72 cm, high speed, inline system, one man operation, sheet to sheet lamination, anti static device, HTB feeder with vacuum fed table, film perforation & slitter, air shaft, speed up to 75m/min, stock range 115-500gsm (8867)
  • 2000 Lamtex T720, 76 x 102 cm, min sheet 24 x 29cm, max sheet weight 450g/2, min sheet weight 90g/m, automatic feeder, automatic sheet separator, vacuum lay board, swing arm with micro adjustment of film perforator, speed up to 30m/minute (8925)
  • 1995 Lamtex T720, 76 x 102 cm, automatic thermal laminator, min sheet 24 x 29cm, automatic feeder, automatic sheet separator, vacuum lay board, swing arm with micro adjustment of film perforator, speed up to 40m/minute. (8702)
  • Lamtex TI76E, 0, deep pile feeder, infeed unit, thermal laminator, heat exchanger, automatic sheeter, jogger delivery, 2 sided lamination, HTB feeder, vacuum feed table (8890)

    • Paperplast

  • 2005 Paperplast DRY 40, 710 x 102 cm, Samal feeder, jogger table delivery, max speed 40m/min. (8833)
  • 2007 Paperplast WD2 EVO, 140 x 104 cm, automatic film laminator, max sheet size 140 x 104cm, min sheet size 30 x 45cm, Samal bookmark, polyester cutting blade, automatic pile suction feeder (8819)
  • 2007 Paperplast EVOLUTION, 102 x 165 cm, Samal automatic pile suction feeder, powder spray removal device, hot knife for polyester & metallised film, automatic blade, speed up to 100m/min (8856)
  • 2001 Paperplast WD102, 102 x 114 cm, min sheet size 30 x 28 cm, Samal automatic pile suction feeder with back separation, powder spray removal device, speed up to 70m/min, for both thermal & water based lamination, fully automatic stacker, high speed machine with low power consumption. (8818)
  • 2014 Paperplast DRY 80/102, 23 x 25 cm, min sheet size 760mnm, Samal feeder, side trim of unwind film, chrome calender, automatic separator with intelligent knife, automatic stacker with slow motion sheets. (8942)
  • 2001 Paperplast 76, 0 x 106 cm, min sheet 21 x 25cm, Mabeg automatic pile suction feed with back separation, automatic sheet separator, fully automatic stacker, speed up to 60m/min (8919)

    • MK

  • 2007 MK YM1050, 105 x 75 cm, hot foil stamping machine, 3 foil pulls, 20 heating zones, rewind, chase changer (8949)
  • 2012 MK 920SS DUOPRESS, 92 x 65 cm, die cutting & foil stamping, 20 heating zones, min sheet size 360 x 320 mm, max die cutting size: 910 x 630 mm, max. stamping size: 900 x 600 mm, cardboard thickness: 90-2000 g/m2 and 0.1-2 mm, (8901)
  • 2010 MK 20160 STE DUOPRESS, 76 x 106 cm, with stripping
  • 2011 MK DUOPRESS 1060STE, 70 x 105 cm, in one pass with 2 stations, min sheet size 45 x 36cm, max die cutting size 1045 x 745mm, max speed 7,700sph, foil stamping, diecutting, stripping (8948)

    • Peroni

  • 2017 Peroni SC1000, 13 x 13 cm, for rigid board boxes, cardboard size min 130 x 130mm, max 700 x 700mm, double feeder, grooving unit for U & V cuts & double dleivery unit (8906)

    • Sakurai

  • 1998 Sakurai MF80, 80 x 60 cm, high precision flat bed automatic screen printing press, 80 x 60 cm, min sheet 35 x 27 cm, print area 80 x 58 cm, automatic pile feeder, GTB hot and cold air dryer, fully automatic stacker, substrate thickness 0.1 – 3 mm (8931)
  • 2014 Sakurai MS80A, 80 x 55 cm, min sheet size 350 x 270mm, automatic pile suction feeder with back separation, speed up to 3600sph, Natgraph UV dryer (2016), Natgraph automatic stacker (2016) (8871)
  • 2002 Sakurai SC102AII, 72 x 102 cm, max print area 70 x 102cm, min sheet size 56 x 37cm, automatic stream feeder, Trumax UV dryer, automatic stacker (8945)
  • 1997 Sakurai SC102AII, 72 x 102 cm, max print area 70 x 102cm, min sheet size 56 x 37cm, automatic stream feeder, sheet detector, UV dryer TX100, automatic stacker, 1 exposing unit & 15 frames included (8927)
  • 2002 Sakurai SC102AIIi, 72 x 102 cm, max print area 70 x 102cm, min sheet size 56 x 37cm, automatic stream feeder, Trumax UV dryer, automatic stacker
  • 2002 Sakurai SC72A, 52 x 72 cm, automatic pile suction feed with back separation, UV dryer,, Trumax fully automatic stacker, (8934)
  • 1996 Sakurai SC72A, 52 x 72 cm, automatic pile suction feed with back separation, combination dryer, UV & hot air, Trumax fully automatic stacker (8930)

    • Sanwa

  • 1997 Sanwa TRP 1060-SE, 74 x 106 cm, min sheet format: 330mm x 440mm, max die cutting format 735mm x 1050mm, sheet feeder, die cutting, stripping, pile stacker, material 0.1mm up to 5mm, die cutting force: 300T, machinery dimensions L x W x H: 5563mmx 2100mm, x 2193mm. (8936)

    • SBL

  • 2012 SBL 1060CS ALPHA LUNA, 106 x 76 cm, automatic diecutting with stripping, min sheet size 40 x 35cm, max paper die cutting dimensions 105 x 74cm, die cutting pressure 300 tons, max die cutting speed 8000sph, gripper edge removal system, elevated. (8940)
  • 2003 SBL SHCUV 350, 72 x 104 cm, UV spot/full flood varnishing machine, max sheet size 72 x 104cm, sheet feeder, varnishing section (rubber or flexo plates), IR + UV dryer with 3 lamps, delivery (8781)

    • SPS

  • 2006 SPS CYBERPRESS CP2, 720 x 1020 cm, min sheet size 320 x 450mm, screen size 1140 x 1280mm, automatic pile suction feed, speed up to 3,300sph, Natgraph twin UV lamp dryer, lamp curing width 1100mm (8835)
  • 2000 SPS VITESSA STAR G2, 79 x 104 cm, inline with SPS Turbostar combination dryer with Jet air & UV (2001, min sheet size 31 x 44cm, material thickness 0,1 - 0,8mm, speed 800-3000sph, screen frame size 1250 x 1320mm, Mabeg sheet feeder (8947)
  • 2012 reconditioned SPS VITESSA STAR G2, 79 x 104 cm, min sheet format 320 x 450mm, sheet thickness from 0.1mm to max 0.8mm, frame size 1270 x 1320mm, speed up to 3,400sph, fully automatic suction feed with back separation, UV drying unit, fully automatic stacker (8707)
  • 1997 SPS G2, 75 x 106 cm, automatic pile suction feed with rear suction feeder, automatic sheet separator, combi dryers (3 x UV lamps 120 w/cm with 2 x heating sections and a cooling), gripper for cardboard. (8783)
  • 1997 SPS VITESSA MULTISTAR G2, 70 x 102 cm, max printing size 67 x 100cm, fully automatic suction feed with back separation, max width 3mm IR, hot air, UV drying line (modular line that can be reduced), pile stacker delivery (8911)

    • Starfoil

  • Starfoil HOT FOIL STAMPING CYLINDER, 73 x 104 cm, min sheet 290 x 400mm, foiling area 720 x 1038mm, feeder pile height 500mm, delivery pile height 850mm, max sheet thickness 0.65mm, 6 heating zones, max foil diameter 125mm, 2 foil units, number of lengths per programme – 3, PLC control, (8704)

    • Steinemann

  • 2000 Steinemann Colibri 102, 104 x 142 cm, min sheet size 21 x 25cm, max speed 10,000sph, hot air unit/IR drying, sheet weight 70-600g/m2, UV varnish application 2.5-10g/m2 (8841)
  • 2002 Steinemann LOTUS 102SF, 100 x 140 cm, Mabeg pile suction feeder, rotary hot knife, Mirus fully automatic stacker with blow-down system, powder spray removal device, sheet weight 100-600gsm, speed up to 70m/min, ideal for metallised film & polyester.
  • 1989 Steinemann Uvimat 86, 86 x 102 cm, min sheet size 22 x 28cm, Mirus pile suction feeder, 3 UV lamps, powder removal calender with heater, varnishing unit, Mirus automatic stacker, speed 10,000sph (8829)
  • 2007 Steinemann COLIBRI 104, 74 x 104 cm, min sheet 21 x 25 cm, Mabeg automatic pile suction feeder, UV dryer, speed up to 10,000 sph, stock handled 70 – 600 gsm, fully automatic stacker, air knife (8857)
  • 2006 Steinemann Colibri 74, 74 x 104 cm, Mabeg stream feeder coating unit with recirculating pumps, UV drying station, cooling station, deep pile delivery, vacuum pumps, extraction fans, speed 11,000sph, material 70-600gsm (8881)
  • 2000 Steinemann Colibri 72, 72 x 102 cm, min sheet size 21 x 28 cm, single stream operation, sheet weight min 70g/m2, max 600g/m2, Mabeg sheet feeder, sheet cleaning unit, roller coater, UV dryer with cooling, sheet stacker, material 70 - 600 g/m2, max speed 10.000sph. (8943)

    • Tymi

  • 2006 Tymi Ustar 36, 80 x 110 cm, min 34 x 40cm, coating area 79 x 109cm, paper thickness 80 to 600 gsm, machine speed 6000 sheets/hour, total power 52.1 kw, stream feeder, 3 lamps curing equipments ( 3 X 9,7 KW)- total 29,1 kw, automatic system for creasing (8928)
  • 2017 Tymi Ustar, 73 x 103 cm, min sheet size 34 x 40cm, spot or full surface coating, speed up to 8,800sph, extended delivery, 2 infrared units, de stacker & overlapping, Tymi SH1303 UV unit. (8788)

    •